| CROSBY EYE HOIST HOOKS |
|
All Crosby 320 Eye Hoist Hooks incorporate the following features"
 Designed with a 5:1 Design Factor- Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk
- Pre-drilled cams which can be equipped with a latch.
-
 Load-rated eye hooks
- Available in carbon steel and alloy steel
|
|
| ULVEN HOOKS |
Models carried:
113 Cross Eye (Reverse Eye) Arch Hook
113 S Swivel Arch Hook
114 Straight Eye (Regular Eye) Arch Hook
115 Line Hook
116 Flat Choker Hook
117 Buzzard Hook
118 Buzzard Swivel Hook
119 Swamp Hook
131 Strawline Hook
132 Sorting Hook
133 Shackle Swivel Hook
134 Swivel Line Hook
135 Iuka Swivel
136 Dumm 3-Way Swivel
137 Strawline Swivel
143 Drawbar Hook
151 Trailer Loading Hook
159 Dropline Swivel
169 Haul Back Swivel
178 Line Swivel |
|
| CROSBY SWIVEL HOOKS |
|
Proper design, careful forging and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. Load rating codes are stamped on each hook |
|
| CROSBY SWIVELS |
|
Crosby Swivels are individually proof tested with certification
-
 All hooks are furnished with latches assembled
- All jaws complete with bolts, nuts and cotter pins
- Designed to swivel under load
- Pressure lube fitting provided
- NOT TO BE USED ON DEMOLITION WRECKING BALLS
- Types and capacities up to 600-tons available
|
|
| CROSBY SHACKLES |
|
- Working load limit permanently shown on every shackle
 Capacities 1/3 thru 55 tons- Look for the red pin...the mark of genuine Crosby quality
- Shackles can be furnished proof tested with certificates to designated standards
- Hot dip galvanized or self colored
- Fatigue rated
|
|
| ULVEN SHACKLES |
MODELS CARRIED :
 101 Screw Pin Shackle (With 1/8" oversize screw pin; most commonly used shackle for general rigging.)- 102 Safety Pin Shackle (Same bale configuration as the 101; pin complete with nut and molly hole. This shackle is frequently referred to as a safety pin shackle.)
- 103 Screw Pin Bell Pattern (Bale similar in size to hanging shackle.)
- 104 Top Tong Shackle (Same as 103, but pin has molly hole.)
- 105 Straight Side Screw Pin Shackle
- 106 Straight Side Safety Pin Shackle (With nut and molly hole)
- 107 Straight Side Loose Pin Shackle (With cotter pin. Frequently referred to as guyline shackle.)
- 108 Hanging Shackle (Bale has a deep spread with a wide bell. Safety pin is secured with a jam nut and molly hole.
 110 Flush Pin Shackle (Pin threads into the shackle, hole will accommodate a 1/2" drive.)- 111 S Flat Bottom / Flush Pin Shackle
- 112 Arch Hook Shackle (Shackle has a slight bell in the bale.)
- 144 Spreader Bar Shackle
- 164 Montelius Shackle (Forged flap helps prevent choker
 loss. For use with #113 style arch hook.)
- 174 Butt Shackle (These shackles are dimensionally designed to fit into all popular types of Butt Rigging assemblies. High alloy shackle bale is specially designed, forged and heat treated for maximum wear and strength. Fine or coarse threaded pin option.)
|
|
| CROSBY CHAIN SHACKLES |
|
SUPER ALLOY MODELS CARRIED:
- 321 Safety Pin Shackle (1" to 41/2")
- 270 Screwpin Shackle With Eyed Pin ( 1" to 2")
- 271 Screwpin Shackle with Hex Head Pin (1" to 2")
- 325 Towing Shackle with Double Nut and Locking Bolts (1 3/4" to 4")
FORGED MODELS CARRIED
- G-210 and S-210 Screw Pins Chain Shackle
- G-215 and S-215 Round Pin Chain Shackle
|
|
| SKOOKUM BLOCKS |
APPLICATIONS:
Logging
Construction
Marine
Mining
Off-shore
Power Line Utility
Contractors
Tilt-up Construction
Road and Marine Towing
Conveyor Systems |
FEATURES:
Compact design
Light weight
Excellent weight to capacity ratio
Quick take-up on line
Easy to handle
Long service life
Easy maintenance
Parts readily available |
Available Line Sizes:
3/8" to 1/2" (Sheave size 4" or 6"
1/2" to 5/8" (Sheave size 8" or 10")
5/8" to 3/4" (Sheave size 10")
3/4" to 7/8" (sheave sizes: 12, 14, 16 or 18")
7/8" to 1" (Sheave sizes: 8, 10, 12, 14, 16 or 18")
1 1/8" to 1 1/4" (Sheave sizes: 8, 10, 12, 14, 16, 18, 20 or 22")
1 1/4" to 1 3/8" (Sheave sizes: 12, 14, 18 or 24")
1 1/2" to 1 3/4" (Sheave size 14" or 16")
|
 SNATCH BLOCKS (Swivel hook or swivel shackle)
HALF SIDE BLOCKS
FULL SIDE BLOCKS
WIDE SHEAVE / WIDE THROAT BLOCKS
MULTI-PURPOSE BLOCKS
HEAVY-DUTY BLOCKS
CUSTOM-BUILT HOSITNG BLOCKS |
(Please furnish the following information when ordering:
1) Maximum load
2) Sheave diameter
3) Number of sheaves
4) Sheave material: Manganese steel or Cast steel
5) Pattern: Diamond or Oval
6) Type of bearing
7) Type hanging device |
|
| ROPEMASTER BLOCKS |
- HALF SIDE BLOCKS
— Medium Duty
— Heavy Duty
— Super Duty
— Lightweight Heavy Duty
- FULL SIDE BLOCKS
- KNOCKDOWN BLOCKS
- RIG-UP BLOCKS
- SAFETY-RAISE BLOCKS
- HOISTING BLOCKS
|
|
| YOUNG BLOCKS |
Haulback Blocks
Light Duty #7081
Lightweight Heavy Duty Haulback Block # 1569 |
|
| ROPE MASTER / SKOOKUM SHEAVES |
 Rope Master / Skookum offers sheaves of cast manganese steel and cast steel because hard sheave surfaces offer the best bearing surface for wire rope, prolonging sheave life and rope life.
Skookum cast manganese steel sheaves offer the ultimate in sheave material. The material actually hardens to the use of wire rope and virtually will never wear out. This "work hardening" property of manganese not only gives greatly extended sheave life, but increases the service time of wire rope.
Skookum heavy-duty cast-steel sheaves give wire rope the proper hardened bearing surface required to food wire rope life, but do not have the "work hardening" property of cast manganese steel sheaves.
When ordering, you will need to provide the following information:
1) Outside diameter
2) Tread diameter
3) Rim width
4) Hub width
5) Bore
6) Bearing type
PB - Plain Bore
RB - Roller bearing (straight or tapered)
BB - Bronze bearing
OBB - Oilite Bronze Bearing (self lubricating)
GBB - Graphite Bronze Bearing
7) Shaft size
8) Rope size |
|
